Loading live prices…

Market data by TradingView

Home / Articles

CopperStocks original

Copper 360 reaches main ore zone at Rietberg copper mine

Copper 360 (JSE: CPR) has reached the main ore zone at its Rietberg underground mine in South Africa's Northern Cape, with development advancing 9 metres into the zone since it was intersected on Nov. 9.

Initial bulk sampling indicates a grade of about 1.9% total copper for the ore mined so far, against 1.33% in the company's mine plan, Copper 360 said on Monday. The figure is not a direct assay. It is back-calculated from 671.5 tonnes of crushed material, made up of an estimated 143.7 tonnes of ore, 202.6 tonnes of footwall waste and 325.2 tonnes of low-grade material, which as crushed averaged 0.50% copper across six samples.

The calculation assumes the footwall waste carries no copper and the low-grade material 0.20%, and it gives a range of 1.3% to 2.3%. The low end is in line with the mine-plan grade. Five undiluted samples of exposed ore from the face and stockpile, analysed by XRF, averaged 2.31% copper, in a range of 1.80% to 3.23%. Those are indicative readings, not laboratory assays. The two nearest historical boreholes, RB239 and RB240, have weighted average grades of 1.35% and 1.66% copper.

The ore enters the excavation from the hanging wall, so the first blasts were only partly in ore, which made up between about a third and a half of the face, the company said. It expects the share of ore to rise with each blast as the breakaway advances.

"These are initial results. Only after a few months of mining will we have a representative picture of the grades," chief executive Gordon Thompson said in the company's statement.

Thompson said the first bulk sample "indicates that the 1.33% copper grade in our model is realistic."

First metres

The results come from the first metres of development in the ore zone and do not change Copper 360's mineral resource or mineral reserve estimates or its mine plan, the company said. Further assays are outstanding, and each blast will be sampled as development advances. A representative view of grade will come only when production can be reconciled against the geological model.

Rietberg is the company's flagship operation, a mostly sulphide orebody supported by a definitive-level study in the O'okiep copper district, according to Copper 360's integrated report for the year to February.

Last month the incline intersected copper sulphide mineralization about 16 metres before the planned 300 Level, earlier than the company's geological model predicted, and bulk samples there returned between 0.48% and 1.50% total copper. Copper 360 said at the time that the body could be new mineralization and is not included in Rietberg's resources and reserves.

Development will continue at the recommended incline of 9 degrees, and Copper 360 expects footwall dilution to fall as the face moves fully into ore.

By Staff Writer. Published by CopperStocks.

Nothing on CopperStocks is investment advice.